NAS200

The NAS200 is a network-attached storage appliance intended for the consumer market. It was originally marketed by the Linksys division of Cisco Systems in 2007.[1]

The NAS200, the successor to the Linux-based NSLU2, has room for two internal SATA drives, a 10/100 Ethernet port, and supports FAT32-formatted external USB 2.0 drives. It comes with UPnP media-sharing software.

The NAS200 is built around a RDC semiconductor R3210-G — a RISC-based System-on-a-chip that executes the Intel 80486 instruction set. The NAS200's stock firmware supports only Microsoft Windows networking (SMB). This firmware includes a Linux 2.6.19 kernel and uses an eCos-based boot loader.[2]

A PC Pro review said "transfer speeds were unimpressive" and found with average read speeds of 3.7 MB/s and average write speeds of 3.2 MB/s.[3] PC Magazine found it a little faster at 4.7 MB/s with 500Gb Seagate drives, but concluded it was too slow for movies.[4]

References

  1. ↑ "Network Attached Storage System with 2 Bays: NAS200". Cisco Systems. Retrieved June 9, 2011.
  2. ↑ Henry Kingman (September 6, 2007). "Linux-based SLUG spawns highly hackable NAS". LinuxDevices.com. Archived from the original on September 9, 2012.
  3. ↑ Matthew Sparkes (November 12, 2007). "Linksys NAS200". PC Pro. Retrieved June 9, 2011.
  4. ↑ Oliver Rist (October 25, 2007). "Linksys NAS200". PC Magazine. Retrieved June 9, 2011.

External links


This article is issued from Wikipedia - version of the 11/10/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.